huaju

　　Hua Ju Electronics is a professional PTC thermistor manufacturer. The over-current protection PTC produced by Hua Ju Electronics is widely used in various electronic products. The PTC thermistor for over-current protection is an automatic protection against abnormal temperature and abnormal current. The restored protective element is commonly known as "resettable fuse" and "ten thousand times fuse". It replaces traditional fuses and can be widely used for overcurrent and overheating protection of motors, transformers, switching power supplies, electronic circuits, etc. PTC thermistors for overcurrent protection limit consumption in the entire circuit through sudden changes in resistance to reduce residual current values. .Traditional fuses cannot recover by themselves after the line is blown, while PTC thermistors for overcurrent protection can return to the pre-protection state after the fault is removed, and can realize their overcurrent and overheating protection functions when a fault occurs again.

　　1. Application scope:

　　Huaju Electronics overcurrent protection PTC thermistor is mainly used for overcurrent and overheating protection of [transformer (adapter)/primary coil/charger/digital multimeter/smart meter/micromotor/transistor], etc., and is directly connected in series with the load In the circuit, when an abnormal condition occurs on the line, it can automatically limit the overcurrent or block the current. When the fault is eliminated, it will return to its original state. It is commonly known as the "10,000-time fuse".

　　2. Features:

　　·Contactless circuit and component protection·Automatic overcurrent limitation

　　·Automatic recovery after troubleshooting ·No noise or sparks during operation

　　·Reliable and easy to use

　　3. Application principle:

　　Connect the overcurrent protection PTC thermistor in series in the power circuit. When the circuit is in a normal state, the current flowing through the PTC is less than the rated current. The PTC is in normal state and has a very small resistance, which will not affect the electronic ballast (energy saving). Normal operation of protected circuits such as lamps, transformers, and multimeters. When the circuit current greatly exceeds the rated current, the PTC suddenly heats up and the resistance suddenly increases to a high resistance state, thereby limiting or blocking the current and protecting the circuit from damage. After the current returns to normal, the PTC also automatically returns to the low resistance state, and the circuit returns to normal operation.

　　Overcurrent protection PTC thermistors are used in overcurrent protection application fields such as [transformer (adapter)/primary coil/charger/digital multimeter/smart electricity meter/micromotor/transistor]. Nanjing Huaju relies on its scientific research and technology Taking advantages in other aspects, it was the first to launch the WMZ12A product featuring high withstand voltage (V≥300V AC).

　　3. Model name, appearance structure and dimensions:

　　When using PTC as an overcurrent protection component, you should generally select appropriate specifications for maximum non-operating current and maximum working voltage. Factors such as the component's overall dimensions, rated zero-power resistance, and operating temperature range should also be considered. Usually, 1.2 to 1.5 times the maximum operating current of the circuit during normal operation is taken as the maximum non-operating current of the PTC; the voltage that the line may apply to the PTC under normal or abnormal conditions should not be greater than its maximum operating voltage.

　　.The main technical parameters:

　　Mainly used for overcurrent protection of chargers, adapters (primary coils), energy meters, digital multimeters, etc.